Quick-Drying Lasting Adhesion Stronger Quick-Drying Better Performance Stronger Quick-Drying Better Performance Stronger
4 Litre Adhesive cans
High Performance adhesives, glues, primers, sealants and solvents for PVC surfaces



  PVC surface Adhesives, Glues, Primers, Sealants and Solvents  
 
Chem-I-Weld
Seam Sealer for Pipes and Cooling Towers
PVC Glue
Chem-I-Weld Bondtech A353H

  ADHESIVES
Bondtech A353H cooling tower adhesive is a fill media bonding agent with ultra violet light stabilisation. Bondtech A353H is also used as a seam sealant as well as a pipe jointing adhesive.
 
Also see
Industries: Construction and Building, Insulation, Plumbing, Refrigeration,
Surfaces: Piping, PVC,
Types:
Tags: Chem-I-Weld, Cooling tower adhesive, Pipe adhesive, Seam sealant, UV,

Chem-I-Weld
Acetone Solvent
Glue Solvent Thinner Cleaner
Chem-I-Weld Bondtech Acetone

  ADHESIVES
Acetone solvent can be used to clean adhesives based on polyurethane.This solvent can also be used as a thinner for acetone based PVC and polyurethane adhesives. It is not suitable for cleaning equipment used for polystyrene foam since the solvent will attack polystyrene foam.
 
Also see
Industries: Cleaning,
Surfaces: Polyurethane, PVC,
Types:
Tags: Chem-I-Weld, Acetone thinner, Adhesive remover, Polyurethane adhesive cleaner, Remove adhesive,

Lami-Weld
PVC Film Laminating Emulsion
Laminate Glue
Lami-Weld Bondtech E457

  ADHESIVES
Bondtech E457 is a specially formulated synthetic emulsion designed for speciality uses such as laminating supported and unsupported PVC (polyvinyl chloride) films to porous substrates such as hardboard, plywood, etc. It can be also used for speciality papers and displays excellent flexibility, specific adhesion, heat and water resistance. Bondtech E457 can also be used for packet making involving coated and certain varnished paperboards.
 
Also see
Industries: Carpentry Woodworking, Construction and Building, Furniture, Packaging,
Surfaces: Hardboard, PVC, Wood,
Types:
Tags: Lami-Weld, Laminating adhesives, Laminating emulsion, Laminating glue,

Chem-I-Weld
Eurobond PVC Polyurethane Adhesive
Polyurethane Glue
Chem-I-Weld Bondtech Eurobond PVC

  ADHESIVES
Bondtech Eurobond PVC is a two part polyurethane adhesive with high heat resistance and bond strength. It is designed as a low odour adhesive. When used with the relevant wipes or a halogenation primer, excellent results can be obtained on polyurethane, PVC and TPR.
 
Also see
Surfaces: Polyurethane, PVC, TPR,
Types:
Tags: Chem-I-Weld, Eurobond PVC,

Chem-I-Weld
Permanent Contact Adhesive
Contact Adhesive
Chem-I-Weld Bondtech N100

  ADHESIVES
Bondtech N100 is a golden brown liquid of brushing viscosity. It forms strong, permanent contact bonds between the following materials; rigid PVC sheet, polyurethane foams of the polyester and polyether types, supported PVC leather cloth, leather, polyester glass fibre, rubber sheet and extrusions; all of which may be bonded to each other or to hardboard, chipboard, wood, painted or unpainted metal. Rigid laminated plastics such as formica, melamine etc. may also be fixed with this adhesive. Bondtech N100 has also proved to be a multi-purpose adhesive in the shop/bar-fitting trades and in the boat building, furniture & footwear industries. This material has excellent ageing resistance.
 
Also see
Industries: Art and Craft , Carpentry Woodworking, Footwear and Shoe, Furniture, Marine Boat Yacht Ship, Shop-Bar Fitting,
Surfaces: Chipboard, Foam, Formica, Melamine, Metals, Plastic, Polyester fibre, Polyester Foam, Polyether Foam, Polyurethane Foam, PVC, Rubber, Wood, Leather, Hardboard, Painted,
Types:
Tags: Chem-I-Weld, Carpentry Adhesives, Foam Adhesive, Furniture Adhesive, Leather Adhesive, Permanent Adhesive, Rubber Adhesive, Shoe Adhesive, Shoe Repair, Wood Adhesive,

Chem-I-Weld
Heavy Black Contact Adhesive
Contact Adhesive
Chem-I-Weld Bondtech N100 Heavy Black

  ADHESIVES
Bondtech N100 is a golden brown liquid of brushing viscosity. It forms strong, permanent contact bonds between the following materials; rigid PVC sheet, polyurethane foams of the polyester and polyether types, supported PVC leather cloth, leather, polyester glass fibre, rubber sheet and extrusions; all of which may be bonded to each other or to hardboard, chipboard, wood, painted or unpainted metal. Rigid laminated plastics such as formica, melamine etc. may also be fixed with this adhesive. Bondtech N100 has also proved to be a multi-purpose adhesive in the shop/bar-fitting trades and in the boat building, furniture & footwear industries. This material has excellent ageing resistance.
 

Chem-I-Weld
Heavy Contact Adhesive
Contact Adhesive
Chem-I-Weld Bondtech N100HV

  ADHESIVES
Heavy Contact Adhesive
Bondtech N100 Heavy (N100HV) is a thick golden brown liquid of brushing viscosity. It forms strong, permanent contact bonds between the following materials; rigid PVC sheet, polyurethane foams of the polyester and polyether types, supported PVC leather cloth, leather, polyester glass fibre, rubber sheet and extrusions; all of which may be bonded to each other or to hardboard, chipboard, wood, painted or unpainted metal. Rigid laminated plastics such as formica, melamine etc. may also be fixed with this adhesive. Bondtech N100HV has also proved very versatile to be a multi-purpose adhesive in the shop/bar-fitting trades and in the boat building, furniture & footwear industries. This material has excellent ageing resistance.
 

Chem-I-Weld
Clear Permanent Adhesive
Contact Adhesive
Chem-I-Weld Bondtech N131 Clear

  ADHESIVES
Bondtech N131 is an adhesive of brushing viscosity. It forms strong, permanent contact bonds between the following materials; rigid P.V.C. sheet, polyurethane foams of the polyester and polyether types, supported P.V.C. leather-cloth, leather, polyester glass fibre, rubber sheet and extrusions, all of which may be bonded to each other or to hardboard, chipboard, wood, painted or unpainted metal. Rigid laminated plastics such as formica, melamine etc. may also be fixed with these adhesives. Bondtech N131 has also proved very versatile in the shop-fitting and bar-fitting trades, and in the boat building, furniture and footwear industries, where it is widely used as a multi-purpose adhesive. This material has excellent ageing resistance as well as exhibiting a higher than average tolerance for plasticiser migration.
 
Also see
Industries: Marine Boat Yacht Ship, Carpentry Woodworking, Footwear and Shoe, Furniture, Shop-Bar Fitting,
Surfaces: Formica, Leather, Melamine, Metals, Painted, Polyester fibre, PVC, Rubber, Wood,
Types:
Tags: Chem-I-Weld, Carpentry Adhesives, Wood Adhesive, Foam Adhesive, Leather Adhesive, Shoe Repair, Shoe Adhesive, Permanent Adhesive, Rubber Adhesive, Furniture Adhesive,

Chem-I-Weld
Permanent Contact Adhesive
Contact Adhesive
Chem-I-Weld Bondtech N131B

  ADHESIVES
Bondtech N131B is an adhesive of brushing viscosity with excellent ageing resistance as well as exhibiting a higher than average tolerance for plasticiser migration. It forms strong, permanent contact bonds between the following materials; rigid P.V.C. sheet, polyurethane foams of the polyester and polyether types, supported P.V.C. leather-cloth, leather, polyester glass fibre, rubber sheet and extrusions, all of which may be bonded to each other or to hardboard, chipboard, wood, painted or unpainted metal. Rigid laminated plastics such as formica, melamine etc. may also be fixed with these adhesives.
 
Also see
Industries: Marine Boat Yacht Ship, Carpentry Woodworking, Footwear and Shoe, Furniture, , Shop-Bar Fitting,
Surfaces: Chipboard, Hardboard, Leather, Painted, Polyester Foam, Polyether Foam, Polyurethane Foam, PVC, Timber, Wood, Rubber, Polyester fibre,
Types:
Tags: Chem-I-Weld, Carpentry Adhesives, Wood Adhesive, Foam Adhesive, Leather Adhesive, Shoe Repair, Shoe Adhesive, Permanent Adhesive, Rubber Adhesive, Furniture Adhesive,

Chem-I-Weld
Brown Sprayable Multipurpose Adhesive
Contact Adhesive
Chem-I-Weld Bondtech N131L Brown

  ADHESIVES
Bondtech N131L is an adhesive of spraying viscosity. It forms strong, permanent contact bonds between the following materials; rigid P.V.C. sheet, polyurethane foams of the polyester and polyether types, supported P.V.C. leather-cloth, leather, polyester glass fibre, rubber sheet and extrusions, all of which may be bonded to each other or to hardboard, chipboard, wood, painted or unpainted metal. Rigid laminated plastics such as formica, melamine etc. may also be fixed with these adhesives. Bondtech N131L has also proved very versatile in the shop-fitting and bar-fitting trades, and in the boat building, furniture and footwear industries, where it is widely used as a multi-purpose adhesive. This material has excellent ageing resistance as well as exhibiting a higher than average tolerance for plasticiser migration.
 

Chem-I-Weld
Permanent Clear Sprayable Adhesive
Contact Adhesive
Chem-I-Weld Bondtech N131L Clear

  ADHESIVES
Bondtech N131L is an adhesive of spraying viscosity. It forms strong, permanent contact bonds between the following materials; rigid P.V.C. sheet, polyurethane foams of the polyester and polyether types, supported P.V.C. leather-cloth, leather, polyester glass fibre, rubber sheet and extrusions, all of which may be bonded to each other or to hardboard, chipboard, wood, painted or unpainted metal. Rigid laminated plastics such as formica, melamine etc. may also be fixed with these adhesives. Bondtech N131L has also proved very versatile in the shop-fitting and bar-fitting trades, and in the boat building, furniture and footwear industries, where it is widely used as a multi-purpose adhesive. This material has excellent ageing resistance as well as exhibiting a higher than average tolerance for plasticiser migration.
 

Chem-I-Weld
Sprayable Permanent Contact Adhesive
Contact Adhesive
Chem-I-Weld Bondtech N131S

  ADHESIVES
Bondtech N131S is an adhesive of spraying viscosity. It forms strong, permanent contact bonds between the following materials; rigid P.V.C. sheet, polyurethane foams of the polyester and polyether types, supported P.V.C. leather-cloth, leather, polyester glass fibre, rubber sheet and extrusions, all of which may be bonded to each other or to hardboard, chipboard, wood, painted or unpainted metal. Rigid laminated plastics such as formica, melamine etc. may also be fixed with these adhesives. Bondtech N131S has also proved very versatile in the shop-fitting and bar-fitting trades and in the boat building, furniture and footwear industries, where it is widely used as a multi-purpose adhesive. This material has excellent ageing resistance as well as exhibiting a higher than average tolerance for plasticiser migration.
 

Lami-Weld
Red Multipurpose Trim Adhesive
Laminate Glue
Lami-Weld Bondtech N150 Red

  ADHESIVES
Bondtech N150 is a general purpose solvent based sprayable contact adhesive with long open time. It is specifically formulated for laminating of laminex and formica to various types of wood such as chipboard and hardboard. Bondtech N150 is also suitable for the coach building and automotive industries as a multipurpose trim adhesive. Strong permanent bonds can be obtained between the following materials; polyurethane foams, supported P.V.C., fabric, leather, fibreglass, rubber sheet and extrusions to each other, wood and metal.
 

Lami-Weld
Clear Multipurpose Trim Fire Retardant Adhesive
Laminate Glue
Lami-Weld Bondtech N150FR Clear

  ADHESIVES
Bondtech N150FR is a flame retardant sprayable contact adhesive with long open time. It is specifically formulated for laminating of laminex and formica to various types of wood such as chipboard and hardboard. Bondtech N150FR is also suitable for the coach building and automotive industries as a multipurpose trim adhesive. Strong permanent bonds can be obtained between the following materials; polyurethane foams, supported P.V.C., fabric, leather, fibreglass, rubber sheet and extrusions to each other, wood and metal.
 

Lami-Weld
Red Multipurpose Trim Fire Retardant Adhesive
Laminate Glue
Lami-Weld Bondtech N150FR Red

  ADHESIVES
Bondtech N150FR is a flame retardant sprayable contact adhesive with long open time. It is specifically formulated for laminating of laminex and formica to various types of wood such as chipboard and hardboard. Bondtech N150FR is also suitable for the coach building and automotive industries as a multipurpose trim adhesive. Strong permanent bonds can be obtained between the following materials; polyurethane foams, supported P.V.C., fabric, leather, fibreglass, rubber sheet and extrusions to each other, wood and metal.
 

Lami-Weld
Blue Multipurpose Trim Adhesive
Laminate Glue
Lami-Weld Bondtech N150i Blue

  ADHESIVES
Bondtech N150i is a sprayable contact adhesive with long open time. It is specifically formulated for laminating of laminex and formica to various types of wood such as chipboard and hardboard. Bondtech N150i is also suitable for the coach building and automotive industries as a multipurpose trim adhesive. Strong permanent bonds can be obtained between the following materials; polyurethane foams, supported PVC, fabric, leather, fibreglass, rubber sheet and extrusions to each other, wood and metal.
 

Lami-Weld
Clear Multipurpose Sprayable Trim Adhesive
Laminate Glue
Lami-Weld Bondtech N150i Clear

  ADHESIVES
Bondtech N150i is a sprayable contact adhesive with long open time. It is specifically formulated for laminating of laminex and formica to various types of wood such as chipboard and hardboard. Bondtech N150i is also suitable for the coach building and automotive industries as a multipurpose trim adhesive. Strong permanent bonds can be obtained between the following materials; polyurethane foams, supported PVC, fabric, leather, fibreglass, rubber sheet and extrusions to each other, wood and metal.
 
Also see
Industries: Automotive, Carpentry Woodworking,
Surfaces: Fabrics, Fibreglass, Formica, Hardboard, Laminex, Leather, Metals, Polyurethane Foam, PVC, Rubber, Wood,
Types:
Tags: Lami-Weld, Coach building, Laminate, Laminex, Trim adhesive,

Chem-I-Weld
Black Multipurpose Sprayable Trim Adhesive
Contact Adhesive
Chem-I-Weld Bondtech N156 Black

  ADHESIVES
Bondtech N156 is a sprayable contact adhesive with medium open time. Strong permanent bonds can be obtained between the following materials; polyurethane foams, supported PVC, fabric, leather, fibreglass, rubber sheet and extrusions to each other, wood and metal. It is also suitable for the coach building and automotive industries as a multipurpose trim adhesive.
 

Chem-I-Weld
Clear Multipurpose Sprayable Trim Adhesive
Contact Adhesive
Chem-I-Weld Bondtech N156 Clear

  ADHESIVES
Bondtech N156 is a sprayable contact adhesive with medium open time. Strong permanent bonds can be obtained between the following materials; polyurethane foams, supported PVC, fabric, leather, fibreglass, rubber sheet and extrusions to each other, wood and metal. It is also suitable for the coach building and automotive industries as a multipurpose trim adhesive.
 

Chem-I-Weld
Red Multipurpose Sprayable Trim Adhesive
Contact Adhesive
Chem-I-Weld Bondtech N156 Red

  ADHESIVES
Bondtech N156 is a sprayable contact adhesive with medium open time. Strong permanent bonds can be obtained between the following materials; polyurethane foams, supported PVC, fabric, leather, fibreglass, rubber sheet and extrusions to each other, wood and metal. It is also suitable for the coach building and automotive industries as a multipurpose trim adhesive.
 

Lami-Weld
Clear Multipurpose Sprayable Trim Adhesive
Laminate Glue
Lami-Weld Bondtech N157 Clear

  ADHESIVES
Bondtech N157 is a sprayable contact adhesive with long open time specifically formulated for laminating of laminex and formica to various types of wood such as chipboard and hardboard. Bondtech N157 is also suitable for the coach building and automotive industries as a multipurpose trim adhesive. Strong permanent bonds can be obtained between the following materials; polyurethane foams, supported PVC, fabric, leather, fibreglass, rubber sheet and extrusions to each other, wood and metal.
 

Chem-I-Weld
Thick Black Brushing Adhesive
Contact Adhesive
Chem-I-Weld Bondtech N160 Black

  ADHESIVES
Bondtech N160 is a thick black adhesive of brushing viscosity. N160 can be used for pre-cementing black leather and resin rubber soles. It forms a strong permanent contact bond between the following materials: rigid P.V.C. sheet, polyurethane foams of the polyester and polyether types, supported P.V.C., leather cloth, leather, polyester glass fibres, rubber sheet and extrusions; all of which may be bonded to each other or to hardboard, chipboard, wood, painted or unpainted metal. Rigid laminated plastics such as formica, melamine etc. may also be fixed with these adhesives.
 

Chem-I-Weld
Multipurpose Trim Adhesive
Latex Glue
Chem-I-Weld Bondtech N1824

  ADHESIVES
This product is a water based contact adhesive, which forms bonds with high tensile strength and good heat resistance between many different substrates. Very long open times can be achieved once the adhesive has dried. In the automotive and coach-building industries it is used as a multipurpose body trim adhesive. It forms strong, permanent contact bonds between the following materials; rigid PVC sheet, polyurethane foams of the polyester and polyether types, supported PVC leather cloth, leather, polyester glass fibre, rubber sheet and extrusions, all of which may be bonded to each other or to hardboard, chipboard, and wood.
 

Chem-I-Weld
Multipurpose Fire Retardant Trim Adhesive
Latex Glue
Chem-I-Weld Bondtech N1824FR

  ADHESIVES
This product is a flame retardant water based contact adhesive, which forms bonds with high tensile strength and good heat resistance between many different substrates. Very long open times can be achieved once the adhesive has dried. In the automotive and coach-building industries it is used as a multipurpose body trim adhesive. It forms strong, permanent contact bonds between the following materials; rigid PVC sheet, polyurethane foams of the polyester and polyether types, supported PVC leather cloth, leather, polyester glass fibre, rubber sheet and extrusions, all of which may be bonded to each other or to hardboard, chipboard, and wood.
 

Lami-Weld
Laminex Adhesive and Trim Adhesive
Laminate Glue
Lami-Weld Bondtech N193

  ADHESIVES
Bondtech N193 is a premium quality sprayable solvent based contact adhesive with high green strength and heat resistance. It is specifically formulated for laminating of laminex and formica to various types of wood such as chipboard and hardboard. Bondtech N193 is also suitable for the coach building and automotive industries as a multipurpose trim adhesive. Strong permanent bonds can be obtained between the following materials; polyurethane foams, supported P.V.C., fabric, leather, fibreglass, rubber sheet and extrusions to each other, wood and metal.
 
Also see
Industries: Automotive, Carpentry Woodworking, Manufacturing,
Surfaces: Chipboard, Fabrics, Fibreglass, Formica, Hardboard, Laminex, Metals, Polyurethane Foam, PVC, Rubber,
Types:
Tags: Lami-Weld, Formica, Laminating,

Chem-I-Weld
High Viscosity Permanent Contact Adhesive
Contact Adhesive
Chem-I-Weld Bondtech N93H

  ADHESIVES
Bondtech N93H is a thick golden brown liquid of brushing viscosity. Bondtech N93H forms a strong, permanent contact bonds between the following materials; rigid P.V.C. sheet, polyurethane foams of the polyester and polyether types, supported P.V.C. leather cloth, leather, polyester glass fibre, rubber sheet and extrusions, all of which may be bonded to each other or to hardboard, chipboard, wood, painted or unpainted metal. Rigid laminated plastics such as formica, melamine etc. may also be fixed with these adhesives. Typical coachbuilding operations to which N93H is suited include door and facia trim, roof headlining and parcel racks. Bondtech N93H has also proved very versatile in the shop-fitting and bar-fitting trades, and in the boat building, furniture and footwear industries, where it is widely used as a multipurpose adhesive. This material has excellent ageing resistance.
 

Chem-I-Weld
Greasy Leather Primer
Primer, Catalyst, Preparation
Chem-I-Weld Bondtech P05 Leather Primer

  ADHESIVES
Bondtech P05 leather primer is a two part polyurethane adhesive, with excellent heat and chemical resistance. When used with the relevant activator, excellent results can be obtained on polyurethane, PVC and greasy leather.
 
Also see
Industries: Footwear and Shoe,
Surfaces: Leather, Polyurethane, PVC,
Types:
Tags: Chem-I-Weld, Leather Primer, Polyurethane Adhesive, Adhesive primer, Adhesive catalyst, Surface preparation,

Chem-I-Weld
Polyurethane Adhesive
Polyurethane Glue
Chem-I-Weld Bondtech P900

  ADHESIVES
Bondtech P900 is a one or two part polyurethane adhesive with high heat resistance and bond strength. Bondtech P900 is designed as a low odour adhesive. When used with the relevant wipes or halogenation primer excellent results can be obtained on polyurethane, PVC and TPR.
 
Also see
Industries: Footwear and Shoe,
Surfaces: Polyurethane, TPR, Leather, Rubber, Toe puffs, PVC, Fabrics, Felt,
Types:
Tags: Chem-I-Weld, Footwear, Shoe Glue, Low odour,

Chem-I-Weld
Black Polyurethane Adhesive
Polyurethane Glue
Chem-I-Weld Bondtech P900 Black

  ADHESIVES
Bondtech P900 is a one or two part polyurethane adhesive with high heat resistance and bond strength. Bondtech P900 is designed as a low odour adhesive. When used with the relevant wipes or halogenation primer excellent results can be obtained on polyurethane, PVC and TPR.
 
Also see
Industries: Manufacturing,
Surfaces: Polyurethane, PVC, TPR,
Types:
Tags: Chem-I-Weld, Halogenation primer, Polyurethane Primer, PVC Adhesive, TPR Adhesive,

Chem-I-Weld
Polyurethane Adhesive Solvent
Glue Solvent Thinner Cleaner
Chem-I-Weld Bondtech P900 Solvent

  ADHESIVES
Bondtech P900 is a one or two part polyurethane adhesive with high heat resistance and bond strength. Bondtech P900 is designed as a low odour adhesive. When used with the relevant wipes or halogenation primer excellent results can be obtained on polyurethane, PVC and TPR.
 
Also see
Surfaces: Polyurethane, PVC, TPR,
Types:
Tags: Chem-I-Weld, Adhesive cleaner, Adhesive remover,

Chem-I-Weld
Antistatic PVC Bonding Adhesive
PVC Glue
Chem-I-Weld Bondtech P900AS

  ADHESIVES
No description available yet for Antistatic PVC Bonding Adhesive.
Please Login for access to MSDS or call/email Chemical technology for information.
The Database is currently being populated and information will become available at a later date.  
 
Also see
Surfaces: PVC, TPR,
Types:

Chem-I-Weld
Polyurethane Adhesive Low Odour
Polyurethane Glue
Chem-I-Weld Bondtech P900H

  ADHESIVES
Bondtech P900H is a one or two part polyurethane adhesive with high heat resistance and bond strength. Bondtech P900H is designed as a low odour, higher viscosity adhesive. When used with the relevant wipes or halogenation primer excellent results can be obtained on polyurethane, PVC and TPR.
 
Also see
Surfaces: PVC, TPR,
Types:

Chem-I-Weld
Black Polyurethane Adhesive
Polyurethane Glue
Chem-I-Weld Bondtech P900H Black

  ADHESIVES
Bondtech P900H is a one or two part polyurethane adhesive with high heat resistance and bond strength. Bondtech P900H is designed as a low odour, higher viscosity adhesive. When used with the relevant wipes or halogenation primer excellent results can be obtained on polyurethane, PVC and TPR.
 
Also see
Surfaces: PVC, TPR,
Types:
Tags: Chem-I-Weld, Low odour,

Chem-I-Weld
Polyurethane Adhesive
Polyurethane Glue
Chem-I-Weld Bondtech P904

  ADHESIVES
Bondtech P904 is a two part polyurethane adhesive with high heat resistance and bond strength. Bondtech P904 is designed as a low odour adhesive. When used with the relevant wipes or halogenation primer, excellent results can be obtained on polyurethane, PVC and TPR.
 
Also see
Surfaces: TPR, PVC,
Types:

Chem-I-Weld
PVC Polyurethane Bonding Adhesive
PVC Glue
Chem-I-Weld Bondtech P906

  ADHESIVES
No description available yet for PVC Polyurethane Bonding Adhesive.
Please Login for access to MSDS or call/email Chemical technology for information.
The Database is currently being populated and information will become available at a later date.  
 
Also see
Surfaces: PVC,
Types:

Chem-I-Weld
Polyurethane Adhesive
Polyurethane Glue
Chem-I-Weld Bondtech P911

  ADHESIVES
Bondtech P911 is a two part polyurethane adhesive with high heat resistance and bond strength. It is designed as a low odour adhesive. When used with the relevant wipes or a halogenation primer, excellent results can be obtained on polyurethane, PVC and TPR.
 
Also see
Surfaces: PVC, TPR, Polyurethane,
Types:
Tags: Chem-I-Weld, High Heat Resistance,

Chem-I-Weld
Cold Bonding Polyurethane Adhesive
Polyurethane Glue
Chem-I-Weld Bondtech P915

  ADHESIVES
Bondtech P915 is a one part cold bonding polyurethane adhesive with good heat resistance and bond strength. It is designed as a non heat activated adhesive contact bonding having a low odour. When used with the relevant wipes or halogenation primer excellent results can be obtained on polyurethane, PVC, TPR as well as an array of other substrates. P915 is not suitable for styrene foam or for bonding polyethylene or polypropylene
 
Also see
Surfaces: PVC, TPR,
Types:

Chem-I-Weld
Water Resistant Polyurethane Adhesive
Polyurethane Glue
Chem-I-Weld Bondtech P915L

  ADHESIVES
Bondtech P915L is a one part linear polyurethane adhesive with excellent water resistance, good heat resistance and bond strength. It can be used as an adhesive or coating for, PVC, polyurethane as well as an array of other substrates and fabrics. P915L is not suitable for styrene foam or for bonding polyethylene or polypropylene
 
Also see
Surfaces: Polyurethane, PVC, Fabrics,
Types:

Chem-I-Weld
Polyurethane Adhesive
Polyurethane Glue
Chem-I-Weld Bondtech P918

  ADHESIVES
Bondtech P918 is a two part polyurethane adhesive with high heat resistance and bond strength. It is designed as a low odour adhesive. When used with the relevant wipes or a halogenation primer, excellent results can be obtained on polyurethane, PVC and TPR.
 
Also see
Industries: Footwear and Shoe,
Surfaces: PVC, TPR,
Types:
Tags: Chem-I-Weld, Footwear, Shoe Glue, Sole Adhesive, PVC,

Chem-I-Weld
Polyurethane Adhesive
Polyurethane Glue
Chem-I-Weld Bondtech P928

  ADHESIVES
Bondtech P928 is a one or two part polyurethane adhesive with high heat resistance and bond strength. It is designed as a low odour adhesive. When used with the relevant wipes or halogenation primer excellent results can be obtained on polyurethane, PVC and TPR.
 
Also see
Surfaces: PVC, TPR,
Types:

Chem-I-Weld
PVC Bonding Adhesive
PVC Glue
Chem-I-Weld Bondtech P928L

  ADHESIVES
No description available yet for PVC Bonding Adhesive.
Please Login for access to MSDS or call/email Chemical technology for information.
The Database is currently being populated and information will become available at a later date.  
 
Also see
Industries: Construction and Building, Plumbing, Refrigeration,
Surfaces: PVC,
Types:

Chem-I-Weld
PVC Bonding Adhesive
PVC Glue
Chem-I-Weld Bondtech P953

  ADHESIVES
No description available yet for PVC Bonding Adhesive.
Please Login for access to MSDS or call/email Chemical technology for information.
The Database is currently being populated and information will become available at a later date.  
 
Also see
Industries: Construction and Building, Plumbing,
Surfaces: Polyurethane, PVC, TPR,
Types:

Chem-I-Weld
PW Solvent
Glue Solvent Thinner Cleaner
Chem-I-Weld Bondtech PW Solvent

  ADHESIVES
Bondtech PW Solvent is used as a cleaner/thinner for PVC and polyurethane materials. This solvent can also be used to clean adhesives based on polyurethane. It is not suitable for cleaning equipment used for polystyrene foam since the solvent will attack polystyrene foam.
 
Also see
Surfaces: Polyurethane, PVC,
Types:
Tags: Chem-I-Weld, Adhesive cleaner, Adhesive thinner, Polyurethane, PVC,

Chem-I-Weld
Super PW Solvent
Glue Solvent Thinner Cleaner
Chem-I-Weld Bondtech PW Super

  ADHESIVES
Bondtech Super PW Solvent is used as a strong cleaner for PVC and polyurethane materials. This solvent can also be used to clean adhesives based on polyurethane. It is not suitable for cleaning equipment used for polystyrene foam since the solvent will attack polystyrene foam.
 
Also see
Surfaces: Polyurethane, PVC,
Types:
Tags: Chem-I-Weld, Adhesive cleaner, Adhesive thinner, Polyurethane, PVC,

Chem-I-Weld
PW Super Solvent
Glue Solvent Thinner Cleaner
Chem-I-Weld Bondtech PW Super Solvent

  ADHESIVES
Bondtech Super PW Solvent is used as a strong cleaner for PVC and polyurethane materials. This solvent can also be used to clean adhesives based on polyurethane. It is not suitable for cleaning equipment used for polystyrene foam since the solvent will attack polystyrene foam.
 
Also see
Industries: Cleaning,
Surfaces: Polyurethane, PVC,
Types:
Tags: Chem-I-Weld, Adhesive cleaner, Adhesive thinner, Polyurethane, PVC,

Chem-I-Weld
Permanent Contact Adhesive
Contact Adhesive
Chem-I-Weld Bondtech S758

  ADHESIVES
Bondtech S758 is a golden brown liquid of brushing viscosity. It forms strong, permanent contact bonds between the following materials; rigid PVC sheet, polyurethane foams of the polyester and polyether types, supported PVC leather cloth, leather, polyester glass fibre, rubber sheet and extrusions; all of which may be bonded to each other or to hardboard, chipboard, wood, painted or unpainted metal. Rigid laminated plastics such as formica, melamine etc. may also be fixed with this adhesive. Bondtech S758 has also proved to be a multi-purpose adhesive in the shop/bar-fitting trades and in the boat building, furniture & footwear industries. This material has excellent ageing resistance.
 

Chem-I-Weld
Shrink or Bottle Cap Adhesives
PVC Glue
Chem-I-Weld Bondtech Solution A

  ADHESIVES
Bondtech Solution A is a high quality adhesive primarily used to manufacture shrink caps or bottle caps. Solution A is suitable for bonding PVC shrink caps constructed from painted or unpainted foils.
 
Also see
Industries: Manufacturing, Packaging,
Surfaces: PVC, Shrink caps,
Types:
Tags: Chem-I-Weld, Bottle cap adhesive, Plastic cap adhesive, Polyvinyl chloride adhesive, Shrink cap adhesive,

Chem-I-Weld
Polyurethane Adhesive
Polyurethane Glue
Chem-I-Weld Bondtech SP500

  ADHESIVES
Bondtech SP500 is a one part polyurethane adhesive with high heat resistance and bond strength. Bondtech SP500 is designed as a heat activated adhesive grade coating. When used with Bondtech SP500TT Activator, excellent results can be obtained on polyurethane and PVC.
 
Also see
Surfaces: Polyurethane, PVC,
Types:
Tags: Chem-I-Weld, Heat activated, Heat resistant, Foam,

Chem-I-Weld
Water Based Polyurethane Adhesive
Polyurethane Glue
Chem-I-Weld Bondtech SP553 Adhesive

  ADHESIVES
Bondtech SP553 is a water based polyurethane adhesive with high heat resistance and bond strength. Bondtech SP553 is designed as a heat activated adhesive grade coating. When used with Bondtech SP553 Activator, excellent results can be obtained on polyurethane and PVC.
 
Also see
Surfaces: PVC, Polyurethane,
Types:

Chem-I-Weld
Chemical Resistance Emulsion
Waterproofing Emulsion
Chem-I-Weld Bondtech SP574

  ADHESIVES
Bondtech SP574 is a low viscosity, one component waterbased emulsion with exceptional resistance to water. The product has been specially formulated to provide strong physical and chemical resistance as well as excellent handling properties. It can be applied over both flexible and rigid substrates such as flexible PVC, polyester fabrics and plastic coatings.
 
Also see
Surfaces: Fabrics, Plastic, Polyester fibre, PVC,
Types:
Tags: Chem-I-Weld, Chemical resistance, Fabric adhesive, Plastic adhesive, Polyester adhesive, Polyvinyl chloride adhesive, Water based emulsion,

Chem-I-Weld
Red Waterproofing Emulsion
Waterproofing Emulsion
Chem-I-Weld Bondtech SP574 Red Tinter

  ADHESIVES
Bondtech SP574 is a low viscosity, one component waterbased emulsion with exceptional resistance to water. The product has been specially formulated to provide strong physical and chemical resistance as well as excellent handling properties. It can be applied over both flexible and rigid substrates such as flexible PVC, polyester fabrics and plastic coatings.
 
Also see
Surfaces: Fabrics, Plastic, PVC, Polyester fibre,
Types:
Tags: Chem-I-Weld, Chemical resistance, Fabric adhesive, Plastic adhesive, Polyester adhesive, Polyvinyl chloride adhesive, Water based emulsion,

Chem-I-Weld
Sprayable Polyurethane Adhesive
Polyurethane Glue
Chem-I-Weld Bondtech SP920

  ADHESIVES
Bondtech SP920 is a one part polyurethane adhesive with high heat resistance and bond strength. Bondtech SP920 is designed as a sprayable adhesive. When used with the relevant wipes or halogenation primer, excellent results can be obtained on polyurethane, PVC and TPR.
 
Also see
Surfaces: Fabrics, Plastic, Polyurethane, PVC, TPR,
Types:
Tags: Chem-I-Weld, PVC Adhesive, TPR adhesive,

Chem-I-Weld
Silver Polyurethane Adhesive
Polyurethane Glue
Chem-I-Weld Bondtech SP920 Silver

  ADHESIVES
Bondtech SP920 is a one part polyurethane adhesive with high heat resistance and bond strength. Bondtech SP920 is designed as a sprayable adhesive. When used with the relevant wipes or halogenation primer, excellent results can be obtained on polyurethane, PVC and TPR.
 
Also see
Surfaces: Plastic, Polyurethane, PVC,
Types:
Tags: Chem-I-Weld, Halogenation primer,

Chem-I-Weld
Waterproofing Emuslion
Waterproofing Emulsion
Chem-I-Weld Bondtech SP924

  ADHESIVES
Bondtech SP924 is a one component waterbased emulsion with exceptional resistance to water. The product has been specially formulated to provide strong physical and chemical resistance as well as excellent handling properties. It can be applied over both flexible and rigid substrates such as flexible PVC and plastic coatings.
 
Also see
Industries: Art and Craft ,
Surfaces: Plastic, Polyurethane, PVC, TPR,
Types:
Tags: Chem-I-Weld, Chemical resistance, Fabric adhesive, Plastic adhesive, Polyester adhesive, Polyvinyl chloride adhesive, Water based emulsion,

Chem-I-Weld
Sprayable Polyurethane Adhesive
Polyurethane Glue
Chem-I-Weld Bondtech SP925

  ADHESIVES
No description available yet for Sprayable Polyurethane Adhesive.
Please Login for access to MSDS or call/email Chemical technology for information.
The Database is currently being populated and information will become available at a later date.  
 
Also see
Surfaces: Polyurethane, PVC, TPR,
Types:

Chem-I-Weld
Polyurethane Adhesive
Polyurethane Glue
Chem-I-Weld Bondtech SP930

  ADHESIVES
Bondtech SP930 is a two part polyurethane adhesive with high heat resistance and bond strength. It is designed as a low odour adhesive. When used with the relevant wipes or halogenation primer, excellent results can be obtained on polyurethane, PVC and TPR.
 
Also see
Surfaces: PVC, TPR, Polyurethane,
Types:

Chem-I-Weld
Heat Resistant Polyurethane Adhesive
Polyurethane Glue
Chem-I-Weld Bondtech SP951UV

  ADHESIVES
Bondtech SP951UV is a one part polyurethane adhesive with high heat resistance and bond strength. Bondtech SP951UV is designed as a brushable or sprayable adhesive. When used with the relevant wipes or halogenation primer, excellent results can be obtained on polyurethane, PVC and TPR.
 
Also see
Surfaces: Polyurethane, TPR, PVC,
Types:
Tags: Chem-I-Weld, Polyurethane Adhesives,

Chem-I-Weld
ABS Adhesive
ABS Adhesive
Chem-I-Weld Bondtech Special ABS

  ADHESIVES
Bondtech Special ABS Adhesive Solution is a solvent-cement adhesive used for welding of rigid ABS to itself.
 
Also see
Industries: Automotive, Marine Boat Yacht Ship, Manufacturing,
Surfaces: ABS, Plastic, Polyurethane, PVC, Synthetic Grass, TPR,
Types:
Tags: Chem-I-Weld, ABS Adhesives, ABS glues, Acrylonitrile butadiene styrene, Cement adhesive, Trim Adhesives, Rigid ABS,

Chem-I-Weld
Plastisol Thinner
PVC EVA Plastisol
Chem-I-Weld Bondtech V Plasticiser

  ADHESIVES
No description available yet for Plastisol Thinner.
Please Login for access to MSDS or call/email Chemical technology for information.
The Database is currently being populated and information will become available at a later date.  
 
Also see
Surfaces: Plastic, PVC, EVA,
Types:

Chem-I-Weld
PVC and EVA Dip Coating
PVC Foam Dip , EVA Foam Dip
Chem-I-Weld Bondtech VS280 Black

  ADHESIVES
Bondtech VS280 is a flammable low viscosity dip grade PVC organisol. Its main uses are for dip coating of PVC and EVA foams.
 
Also see
Industries: Automotive,
Surfaces: Automotive dashboards, EVA, PVC,
Types:
Tags: Chem-I-Weld, Ethylene Vinyl Acetate, EVA Foam, Polyvinyl Chloride, PVC Foam,

Chem-I-Weld
PVC and EVA Dip Coating Blue
PVC Foam Dip , EVA Foam Dip
Chem-I-Weld Bondtech VS280 Blue

  ADHESIVES
Bondtech VS280 is a flammable low viscosity dip grade PVC organisol. Its main uses are for dip coating of PVC and EVA foams.
 
Also see
Industries: Footwear and Shoe,
Surfaces: EVA, Foam, PVC,
Types:
Tags: Chem-I-Weld, Ethylene Vinyl Acetate, EVA Foam, Heel dip, Polyvinyl Chloride, PVC Foam,

Chem-I-Weld
PVC and EVA Dip Coating Silver
PVC Foam Dip , EVA Foam Dip
Chem-I-Weld Bondtech VS280 Silver

  ADHESIVES
Bondtech VS280 is a flammable low viscosity dip grade PVC organisol. Its main uses are for dip coating of PVC and EVA foams.
 
Also see
Industries: Footwear and Shoe,
Surfaces: EVA, PVC, Foam,
Types:
Tags: Chem-I-Weld, Ethylene Vinyl Acetate, EVA Foam, Heel dip, Polyvinyl Chloride, PVC Foam,

Chem-I-Weld
Green Strippable Coating
Primer, Catalyst, Preparation
Chem-I-Weld Bondtech VS292

  ADHESIVES
No description available yet for Green Strippable Coating.
Please Login for access to MSDS or call/email Chemical technology for information.
The Database is currently being populated and information will become available at a later date.  
 
Also see
Surfaces: EVA, PVC,
Types:

Chem-I-Weld
Dip Grade Plastisol
PVC EVA Plastisol
Chem-I-Weld Bondtech VS627

  ADHESIVES
Bondtech VS627 is a low viscosity dip grade plastisol. Its main uses are for dip moulding of articles.
 
Also see
Industries: Automotive,
Surfaces: Automotive dashboards, EVA, PVC,
Types:
Tags: Chem-I-Weld, Dip grade plastisol, Dip molding, Dip moulding,

Chem-I-Weld
PVC Nitrile Sole Adhesive Black
Nitrile Adhesive
Chem-I-Weld Bondtech Y249B Black

  ADHESIVES
Bondtech Y249B is a one part nitrile adhesive with high heat resistance and bond strength. Bondtech Y249 is designed as an injection adhesive for PVC nitrile soles.
 
Also see
Industries: Footwear and Shoe,
Surfaces: PVC,
Types:
Tags: Chem-I-Weld, Hexanes, High heat resistance, Injection adhesive, Nitrile soles, XC, Nitrile adhesives, Nitrile glues, Nitrile glue, Footwear, Shoe,

Chem-I-Weld
PVC Nitrile Sole Adhesive
Nitrile Adhesive
Chem-I-Weld Bondtech Y249S

  ADHESIVES
Bondtech Y249S is a one part nitrile adhesive with high heat resistance and bond strength. Bondtech Y249S is designed as an injection adhesive for PVC nitrile soles.
 
Also see
Industries: Footwear and Shoe,
Surfaces: Leather, PVC,
Types:
Tags: Chem-I-Weld, Hexanes, High heat resistance, Injection adhesive, Nitrile soles, XC,